Members Rod Gallery

Randy Search · Randy Search

OK, these are a bit unusual but they kind of grow on you after you look at them awhile. Christopher is a retired Marine currently working overseas in Afghanistan as a civilian contractor. He wanted each guide wrap to mimic the Combat Action Ribbon and also wanted me to incorporate an actual ribbon on ea...

Bennie Beuhler · Bennie Beuhler

783 imp lamiglas which is there im700 series. it has old school handle which is glued to the blank in individual pieces of cork. the handle had to be made longer so that is why there is that long 3" butt cap..............bennie o yes it has spiril wrapped micros -- Edited by Bennie Beuhler on...

Mark Sosebee · Mark Sosebee

Here is a jigging rod that I finished for my brother. It has a St. Johns Cross wrap using metallic colors in red, silver, and blue. This is the first closed wrap that I have tried. There were several times while doing the wrap that I thought about cutting it off and starting over. Sure glad I did not do it. I...

Randy Search · Randy Search

Batson Rainshadow Inshore Popping blank (IP845 7' 10-20 lb.) painted white pearl with extra pink pearl (hard to see in the pics) by Pat (Free Spool). Painted reel seat and guides donated by Captain G (thanks!), EVA split-grips, pink & white checkerboard, wraps in pink, white and light blue. Thi...

Jeremy Wagner · Jeremy Wagner

Here's a couple of rods I just finished up for a guy in upstate PA. The first is a 3S76MLXF that I cut down to 7'3". I used some of Billy V's variegated EVA and Bullard Int. pigments which are the best I'v seen. Fuji Alconites with stainless frames and sixe 4's for runners. The second is a PSU theme...

Randy Search · Randy Search

I just finished this one up for the Toys For Tots campaign. Calstar Grafighter 700 ML (7' 20-30 lb.), hypalon grips, Alps reel seat, Perfection gimbal, Alps guides. Nothing overly fancy, classic black and gold. Getting good shots with lots of black is always a royal PITA because they show everything...

Bennie Beuhler · Bennie Beuhler

this is one of a matching set of rods that i made for fisherladie of sabine lake. it is a medium action rod from ftu with the new fiji plamming reel seat. -- Edited by Bennie Beuhler on Saturday 6th of November 2010 02:48:46 PM

Paul Lindsey · Paul Lindsey

Has any one know if Terry J. is around?

Walker Nelson · Walker Nelson

I registered on this forum awhile back and my job threw a block on it several months ago and I havent been able to get on till now...Hopefully it stays that way,haha! Anyway glad to be here and I look foward to learning and sharing with ya'll..Heres some examples of my work....I was taught by my Dad who is...

Mark Sosebee · Mark Sosebee

Here is my next jigging rod. It has a reversed chevron "flames" wrap of red, orange and yellow with a metallic red under wrap. Completed just in time for a trip to Port A this weekend.

Kyle Jud · Kyle Jud

Here's my first attempt at snakeskin... I think I'm gonna be hooked! Now I know why Mary Lou likes this stuff!!

Larry LaGarce · Larry LaGarce

I was going for an Aztec color scheme. Still need more practice with the finish. I think my problem is that I am a "little intimidated" knowing that it is hard to correct any mistakes at this point. I'll be testing it out this week end. Hope I catch somethin. Hope ya'll like it. [IMG]https://i...

Terry Jones · Terry Jones

6'6" Trout/Redfish wadefishing rod...micro-spiraled. FTU Greenrod, 6'6" APM1 (medium) IM10...Fuji T-KTWAG 8 Stripper, 4.5 TLSG runners (spiraled of course)....EVA grips, Pac Bay split reel seat that I lightly marbled...Tiger Wrap in the split area with Dk Brown NCP and Glitzy gold underneat...

Jeremy Wagner · Jeremy Wagner

I just finished my muskie rod last week and I was able to fish it over the weekend. I picked up the blank (LGM102XH) in High Point and this was the first I've had time to work on it! I'm very pleased with the looks and performance. I went with the variegated EVA from Billy V and I did a white tiger wrap in the...

Mark Sosebee · Mark Sosebee

I was able to complete my first rod. I used it last week to catch some red snapper out of Port A last week. The sad part is that it did not travel well in the truck on the way home. Not sure what happened but now I have about 2 inches of scratches on the rod between 2 guides. Looks like I will be adding a decal of so...

Randy Search · Randy Search

Some of you know me on the other boards so I thought it was appropriate to support this board as well. Here's some examples of my work.

Trey Shaw · Trey Shaw

This is one of my new projects I just started working on.... It is a 6'6" Med/Light Black Matrix Micro Spiral Baitcaster... For my wade fishing adventures . I'm really looking forward to making this rod. I just finished making the rear grip and butt cap out of brown burl, with natural burl and burn...

Rusty Byrley · Rusty Byrley

This is is one of my Ball & Chain Rods that I had fun with some Tri Mar White/Gold, HT Red, and Blk with 15lb PLine over the top with bloodwood/maple accents The purple rod is a LamiglasIS703 from Mudhole with purpleheart/maple accents. The wood color was preserved with Flexcoat CP before the epox...

Raymond Adams · Raymond Adams

My client's wife is a member of the US Army Signal Corps stationed overseas and is an avid basser. This rod is her coming home surprise! It's built on a North Fork Composites MB705-1 IM series blank with custom regular & red burl cork handle, Recoil RSGP guides with a Fuji Ti-Sic tip-top. Threadwor...

Trey Shaw · Trey Shaw

This is a 7' Medium action spinning rod I just finished for my father-n-law....

Trey Shaw · Trey Shaw

I made this one a little while back...... Thought I'd post it up. It is a 6'6" med/light bait caster (my wading rod)

Randy Search · Randy Search

Here's a couple that I was finally able to finish. I saw one of Scott Throop's roller spin rods at either the Fred Hall Show or the West Coast Rod Show (don't recall which one) and really wanted to build one (or 2). I'm in the minority of West Coasters that actually like to spin fish, lol. I tried several dif...

Alfonso Barrera · Alfonso Barrera

here are some pics of my crappie rod that i'm doing for spring.its still not finished but here are the rear grips.

Rusty Byrley · Rusty Byrley

Some pics of my personal flyrod 7wt. 3pc extra fast. I used 4 different reds in this tiger to see what the effect would be. I was hoping for a fade. It didn't happen!

Travis Johnson · Travis Johnson

I've been trying to figure out what to do on the split grip for this rod I am finishing up. I tried a red tiger wrap, but it didn't "pop" like I wanted. I tore it off and saw the mono wrap tutorial and decided to give it a try. I wanted it to complement and blend in with the grip, so I just went with a sim...

Jerry Poindexter · Jerry Poindexter

Actually for a different Duke than the 2 previous Duke rods that I've done. This one is for an Angleton wadefisher. Spiral micros, starting w/ #6 DFoot, going to 4.5's as he uses braid/leader. I had to paint the blank white where his name weave is, in order to use the reg nylon lt. blue. I used PacBay's sk...

Terry Goode · Terry Goode

well, its ready to go test out with a fish on the line. here is just a quick shot, but just before i left for the meeting today (jan 30) i put the flex coat on the Ferrule wrap , not shown here but she is done . so what ya think , do i have a chance at making a good "rod Smith"?

Kyle Jud · Kyle Jud

This is one I just finished up... Phenix X-13 deep crankbait blank, Royal blue w/ steel blue trim, Castaway FE seat, all Fuji 3.5 micros, all on top. I have the full Phenix lineup of blanks in stock. If you'd like a price list, just let me know...

Alfonso Barrera · Alfonso Barrera

[IMG]https://i131.photobucket.com/albums/p304/abz400/Picture516-1.jpg...

MaryLouVandeRiet · MaryLouVandeRiet

Here is a rod that I made for a dear friend of mine that lives in Snyder, Texas and owns a Subway Shop...hence the name The SandwichMaker Rod.... He is a avid crappie angler and years ago I built him a Diamondback rod for him with a inlay crappie jig... He has told me if I ever got hungrey to come out for a sandw...

Topic		Started By	Replies	Views	Last Post
	A couple of Seeker Stand-ups for a Marine vet (Preview) OK, these are a bit unusual but they kind of grow on you after you look at them awhile. Christopher is a retired Marine currently working overseas in Afghanistan as a civilian contractor. He wanted each guide wrap to mimic the Combat Action Ribbon and also wanted me to incorporate an actual ribbon on ea...	Randy Search	9	784	Nov 21, 2010 by Peter Barrett
	coon dog s rods (Preview) 783 imp lamiglas which is there im700 series. it has old school handle which is glued to the blank in individual pieces of cork. the handle had to be made longer so that is why there is that long 3" butt cap..............bennie o yes it has spiril wrapped micros -- Edited by Bennie Beuhler on...	Bennie Beuhler	0	567	Nov 6, 2010 by Bennie Beuhler
	St. John's Cross Wrap (Preview) Here is a jigging rod that I finished for my brother. It has a St. Johns Cross wrap using metallic colors in red, silver, and blue. This is the first closed wrap that I have tried. There were several times while doing the wrap that I thought about cutting it off and starting over. Sure glad I did not do it. I...	Mark Sosebee	3	1302	Oct 29, 2010 by Walker Nelson
	Ladies RFS Rod (Preview) Batson Rainshadow Inshore Popping blank (IP845 7' 10-20 lb.) painted white pearl with extra pink pearl (hard to see in the pics) by Pat (Free Spool). Painted reel seat and guides donated by Captain G (thanks!), EVA split-grips, pink & white checkerboard, wraps in pink, white and light blue. Thi...	Randy Search	4	663	Oct 26, 2010 by Greg Vella
	Two recent ones (Preview) Here's a couple of rods I just finished up for a guy in upstate PA. The first is a 3S76MLXF that I cut down to 7'3". I used some of Billy V's variegated EVA and Bullard Int. pigments which are the best I'v seen. Fuji Alconites with stainless frames and sixe 4's for runners. The second is a PSU theme...	Jeremy Wagner	4	1456	Oct 8, 2010 by Rusty Byrley
	Toys For Tots Rod (Preview) I just finished this one up for the Toys For Tots campaign. Calstar Grafighter 700 ML (7' 20-30 lb.), hypalon grips, Alps reel seat, Perfection gimbal, Alps guides. Nothing overly fancy, classic black and gold. Getting good shots with lots of black is always a royal PITA because they show everything...	Randy Search	7	817	Oct 3, 2010 by Greg Vella
	tattoo handles (Preview) this is one of a matching set of rods that i made for fisherladie of sabine lake. it is a medium action rod from ftu with the new fiji plamming reel seat. -- Edited by Bennie Beuhler on Saturday 6th of November 2010 02:48:46 PM	Bennie Beuhler	2	762	Oct 1, 2010 by Bennie Beuhler
	Terry J. (Preview) Has any one know if Terry J. is around?	Paul Lindsey	4	707	Sep 23, 2010 by Terry Jones
	New guy saying Hi!...Finally!! (Preview) I registered on this forum awhile back and my job threw a block on it several months ago and I havent been able to get on till now...Hopefully it stays that way,haha! Anyway glad to be here and I look foward to learning and sharing with ya'll..Heres some examples of my work....I was taught by my Dad who is...	Walker Nelson	8	755	Aug 18, 2010 by Kyle Jud
	Rod #2 - First Spiral Rod (Preview) Here is my next jigging rod. It has a reversed chevron "flames" wrap of red, orange and yellow with a metallic red under wrap. Completed just in time for a trip to Port A this weekend.	Mark Sosebee	6	814	Jul 24, 2010 by Terry Jones
	My first snakeskin! (Preview) Here's my first attempt at snakeskin... I think I'm gonna be hooked! Now I know why Mary Lou likes this stuff!!	Kyle Jud	10	1425	Jul 17, 2010 by Trey Shaw
	Rod #3...getting beter I think!! (Preview) I was going for an Aztec color scheme. Still need more practice with the finish. I think my problem is that I am a "little intimidated" knowing that it is hard to correct any mistakes at this point. I'll be testing it out this week end. Hope I catch somethin. Hope ya'll like it. [IMG]https://i...	Larry LaGarce	8	774	Jun 29, 2010 by Larry LaGarce
	My latest.. (Preview) 6'6" Trout/Redfish wadefishing rod...micro-spiraled. FTU Greenrod, 6'6" APM1 (medium) IM10...Fuji T-KTWAG 8 Stripper, 4.5 TLSG runners (spiraled of course)....EVA grips, Pac Bay split reel seat that I lightly marbled...Tiger Wrap in the split area with Dk Brown NCP and Glitzy gold underneat...	Terry Jones	4	1308	Jun 12, 2010 by Terry Goode
	Muskie Rod: LGM102XH (Preview) I just finished my muskie rod last week and I was able to fish it over the weekend. I picked up the blank (LGM102XH) in High Point and this was the first I've had time to work on it! I'm very pleased with the looks and performance. I went with the variegated EVA from Billy V and I did a white tiger wrap in the...	Jeremy Wagner	7	795	Jun 11, 2010 by Jeremy Wagner
	My First Rod (Preview) I was able to complete my first rod. I used it last week to catch some red snapper out of Port A last week. The sad part is that it did not travel well in the truck on the way home. Not sure what happened but now I have about 2 inches of scratches on the rod between 2 guides. Looks like I will be adding a decal of so...	Mark Sosebee	8	822	Jun 11, 2010 by Terry Jones
	Newbie here saying hi (Preview) Some of you know me on the other boards so I thought it was appropriate to support this board as well. Here's some examples of my work.	Randy Search	19	1001	May 23, 2010 by Rusty Byrley
	New Project.... 6'6" Med/Light Baitcaster (Preview) This is one of my new projects I just started working on.... It is a 6'6" Med/Light Black Matrix Micro Spiral Baitcaster... For my wade fishing adventures . I'm really looking forward to making this rod. I just finished making the rear grip and butt cap out of brown burl, with natural burl and burn...	Trey Shaw	15	1028	May 19, 2010 by Trey Shaw
	TriMar Floro Tiger (Preview) This is is one of my Ball & Chain Rods that I had fun with some Tri Mar White/Gold, HT Red, and Blk with 15lb PLine over the top with bloodwood/maple accents The purple rod is a LamiglasIS703 from Mudhole with purpleheart/maple accents. The wood color was preserved with Flexcoat CP before the epox...	Rusty Byrley	5	810	May 6, 2010 by Rusty Byrley
	Signal Corps Theme Bass Rod (Preview) My client's wife is a member of the US Army Signal Corps stationed overseas and is an avid basser. This rod is her coming home surprise! It's built on a North Fork Composites MB705-1 IM series blank with custom regular & red burl cork handle, Recoil RSGP guides with a Fuji Ti-Sic tip-top. Threadwor...	Raymond Adams	5	768	Apr 20, 2010 by Paul Lindsey
	7'0" Medium Spinning Rod (Preview) This is a 7' Medium action spinning rod I just finished for my father-n-law....	Trey Shaw	8	868	Mar 3, 2010 by Trey Shaw
	My first rod..... (Preview) I made this one a little while back...... Thought I'd post it up. It is a 6'6" med/light bait caster (my wading rod)	Trey Shaw	14	1141	Mar 3, 2010 by Trey Shaw
	Calstar Roller Spins 7' (25-60) & (30-80) (Preview) Here's a couple that I was finally able to finish. I saw one of Scott Throop's roller spin rods at either the Fred Hall Show or the West Coast Rod Show (don't recall which one) and really wanted to build one (or 2). I'm in the minority of West Coasters that actually like to spin fish, lol. I tried several dif...	Randy Search	6	773	Feb 16, 2010 by MaryLouVandeRiet
	crappie rod (Preview) here are some pics of my crappie rod that i'm doing for spring.its still not finished but here are the rear grips.	Alfonso Barrera	8	862	Feb 13, 2010 by Alfonso Barrera
	Photos (Preview) Some pics of my personal flyrod 7wt. 3pc extra fast. I used 4 different reds in this tiger to see what the effect would be. I was hoping for a fade. It didn't happen!	Rusty Byrley	8	931	Feb 13, 2010 by Rusty Byrley
	I've got mono (wrap) (Preview) I've been trying to figure out what to do on the split grip for this rod I am finishing up. I tried a red tiger wrap, but it didn't "pop" like I wanted. I tore it off and saw the mono wrap tutorial and decided to give it a try. I wanted it to complement and blend in with the grip, so I just went with a sim...	Travis Johnson	8	1229	Feb 10, 2010 by Doug Williams
	Duke's rod (Preview) Actually for a different Duke than the 2 previous Duke rods that I've done. This one is for an Angleton wadefisher. Spiral micros, starting w/ #6 DFoot, going to 4.5's as he uses braid/leader. I had to paint the blank white where his name weave is, in order to use the reg nylon lt. blue. I used PacBay's sk...	Jerry Poindexter	8	1333	Feb 5, 2010 by Trey Shaw
	rod building class project (Preview) well, its ready to go test out with a fish on the line. here is just a quick shot, but just before i left for the meeting today (jan 30) i put the flex coat on the Ferrule wrap , not shown here but she is done . so what ya think , do i have a chance at making a good "rod Smith"?	Terry Goode	10	744	Feb 2, 2010 by Trey Shaw
	Deep Crankbait Rod (Preview) This is one I just finished up... Phenix X-13 deep crankbait blank, Royal blue w/ steel blue trim, Castaway FE seat, all Fuji 3.5 micros, all on top. I have the full Phenix lineup of blanks in stock. If you'd like a price list, just let me know...	Kyle Jud	5	793	Feb 1, 2010 by Trey Shaw
	7' med baitcaster with eva custom handle (Preview) [IMG]https://i131.photobucket.com/albums/p304/abz400/Picture516-1.jpg...	Alfonso Barrera	5	1005	Jan 31, 2010 by Alfonso Barrera
	The Sandwich Maker Rod.... (Preview) Here is a rod that I made for a dear friend of mine that lives in Snyder, Texas and owns a Subway Shop...hence the name The SandwichMaker Rod.... He is a avid crappie angler and years ago I built him a Diamondback rod for him with a inlay crappie jig... He has told me if I ever got hungrey to come out for a sandw...	MaryLouVandeRiet	8	942	Jan 29, 2010 by MaryLouVandeRiet
«First < 1 2 3 > Last» \| Page of 3 sorted by