Grips

Trey Shaw · Trey Shaw

I'm making a fishing rod for my best friend and his name is "Bear".. So I decided to make it a bear theme rod. I'm still working on the grip but the hard part is over. Just have to finish the butt cap with Alaska state quater in it..... Let me know what you think and yes that is cork inlayed in the gr...

Scott · Scott

i am looking for any information i can get on snakeskin inlays on grips. I am building my second rod and would like to learn how to apply and finish snakeskin on grips. Thanks scott.

Greg Vella · Greg Vella

I have not done one of these in several years. I call it "the grenade grip".

Greg Vella · Greg Vella

custome lathe turned grip.

Greg Vella · Greg Vella

I received a wonderful Email today, from Billy Bob Stevens. He asked for advice on a fly rod grip, so I decided to share this with 'ya'll. Hellooo Capt. G! I am amazed at the posts of Captain G on the BD ! I noticed he has fun with fly rods and tuna - I have only built one fly rod - so could you please help m...

MaryLouVandeRiet · MaryLouVandeRiet

I decided to get busy this afternoon and make myself useful, so I decided to start a new copperhead rod.. My buddy from Alabama sent me a niced sized tanned copperhead skin....4 inches at the widest diameter...that he could not use,..so I put it to good use !!..( Don't look to close, I have got a few wrin...

MaryLouVandeRiet · MaryLouVandeRiet

Been working on a Diamondback rod this morning for a client who bought this rod for his boss....applied the second coat of epoxy to the handle and foregrip and built the epoxy ramp for the winding check.... The rodblank is a St.Croix Legend Elite...7 footer..M/H..for Carolina Riggin'.... will use A...

MaryLouVandeRiet · MaryLouVandeRiet

OK Guys.....Here is something I want to share with you all.....if you want to do a snakeskin handle, this is what it should look like..both top and bottom... The top as you can see has a great diamond design....I left the scales on.... The bottom is plain..as you can see, there is barely a seam....this...

Jerry Poindexter · Jerry Poindexter

Had to try to turn some of the swirl that I picked up last wke, for a foregrip. I think it'll look good w/ the black Swampland EVA split grips/trim rings! Jerry

Raymond Adams · Raymond Adams

Getting a good start building on an old Clemens "Apogee" flea flicker 1pc ultralight blank. No guides or threadwork yet just have the grip installed.

MaryLouVandeRiet · MaryLouVandeRiet

Here is a Tennessee Handle that I made from scrap cork...it is on a 7 ft. St.Croix spinning rod..and , of course, it's for crappie fishing... MaryLou~~ -- Edited by MaryLouVandeRiet on Friday 26th of February 2010 08:42:00 AM

MaryLouVandeRiet · MaryLouVandeRiet

Here is a dropdead gorgeous red cedar grip that was very generously given to me by Stan Grace from Montana...not only beautiful, but it has a smooth satin finish !! I am proud to own it !!!.. MaryLou~~

Pat Helton · Pat Helton

My new lathe came in yesterday and I have already made a grip on it. A friend of mine gave me some really cool looking wood. It is real dark so I want to get some light wood and do some elipticle grips. When Princes sees her mop handle, I don't know what she will think about the finger grips. I would like to find...

MaryLouVandeRiet · MaryLouVandeRiet

Here are some photos ( work in progress)of my first ever copperhead rod on a St.Croix Legend Elite blank....7 foot..M/H...Carolina Rig Rod. It took me two years to build this rod..and also used two copperhead skins for the handle and foregrip... This is one of the few rods I have built for myself !!......

Kevin Graybeal · Kevin Graybeal

Kyle Jud · Kyle Jud

Well, I had family in town and couldn't make it to the meeting on saturday. I wanted to show ya'll a grip i've been working on. It's a split grip with a castaway fully exposed seat and a split foregrip. The inlays are buffalo horn. I'll have more pics of it soon....

Raymond Adams · Raymond Adams

Here is a neat technique for one's "bag o' tricks". PDF tutorial is by Lance Rogge. Thanks Lance!

Topic		Started By	Replies	Views	Last Post
	Work in progress... (Preview) I'm making a fishing rod for my best friend and his name is "Bear".. So I decided to make it a bear theme rod. I'm still working on the grip but the hard part is over. Just have to finish the butt cap with Alaska state quater in it..... Let me know what you think and yes that is cork inlayed in the gr...	Trey Shaw	3	4241	Mar 7, 2012 by Doug Williams
	snakeskin grips (Preview) i am looking for any information i can get on snakeskin inlays on grips. I am building my second rod and would like to learn how to apply and finish snakeskin on grips. Thanks scott.	Scott	0	2046	Feb 21, 2012 by Scott
	Just pull the pin.....and cast (Preview) I have not done one of these in several years. I call it "the grenade grip".	Greg Vella	4	3013	Apr 2, 2011 by Greg Vella
	Spiderman, Spiderman, does whatever.... (Preview) custome lathe turned grip.	Greg Vella	5	2999	Nov 22, 2010 by Doug Williams
	To Grip, or not to Grip? (Preview) I received a wonderful Email today, from Billy Bob Stevens. He asked for advice on a fly rod grip, so I decided to share this with 'ya'll. Hellooo Capt. G! I am amazed at the posts of Captain G on the BD ! I noticed he has fun with fly rods and tuna - I have only built one fly rod - so could you please help m...	Greg Vella	3	2792	Oct 23, 2010 by Terry Goode
	Copperhead Rod (Preview) I decided to get busy this afternoon and make myself useful, so I decided to start a new copperhead rod.. My buddy from Alabama sent me a niced sized tanned copperhead skin....4 inches at the widest diameter...that he could not use,..so I put it to good use !!..( Don't look to close, I have got a few wrin...	MaryLouVandeRiet	11	3396	Jul 4, 2010 by MaryLouVandeRiet
	Custom Retirement Rod.... (Preview) Been working on a Diamondback rod this morning for a client who bought this rod for his boss....applied the second coat of epoxy to the handle and foregrip and built the epoxy ramp for the winding check.... The rodblank is a St.Croix Legend Elite...7 footer..M/H..for Carolina Riggin'.... will use A...	MaryLouVandeRiet	3	2640	May 27, 2010 by Jerry Poindexter
	WDB Handles..... (Preview) OK Guys.....Here is something I want to share with you all.....if you want to do a snakeskin handle, this is what it should look like..both top and bottom... The top as you can see has a great diamond design....I left the scales on.... The bottom is plain..as you can see, there is barely a seam....this...	MaryLouVandeRiet	9	3101	Apr 9, 2010 by Rusty Byrley
	Swirl EVA (Preview) Had to try to turn some of the swirl that I picked up last wke, for a foregrip. I think it'll look good w/ the black Swampland EVA split grips/trim rings! Jerry	Jerry Poindexter	7	3067	Feb 28, 2010 by Jerry Poindexter
	Stix & Bones (Preview) Getting a good start building on an old Clemens "Apogee" flea flicker 1pc ultralight blank. No guides or threadwork yet just have the grip installed.	Raymond Adams	4	3083	Feb 23, 2010 by Rusty Byrley
	Tennessee Handles.... (Preview) Here is a Tennessee Handle that I made from scrap cork...it is on a 7 ft. St.Croix spinning rod..and , of course, it's for crappie fishing... MaryLou~~ -- Edited by MaryLouVandeRiet on Friday 26th of February 2010 08:42:00 AM	MaryLouVandeRiet	5	3038	Feb 17, 2010 by Dennis Dickson
	Red Cedar Flyrod Grip.... (Preview) Here is a dropdead gorgeous red cedar grip that was very generously given to me by Stan Grace from Montana...not only beautiful, but it has a smooth satin finish !! I am proud to own it !!!.. MaryLou~~	MaryLouVandeRiet	2	2514	Jan 27, 2010 by MaryLouVandeRiet
	New lathe (Preview) My new lathe came in yesterday and I have already made a grip on it. A friend of mine gave me some really cool looking wood. It is real dark so I want to get some light wood and do some elipticle grips. When Princes sees her mop handle, I don't know what she will think about the finger grips. I would like to find...	Pat Helton	5	3373	Jan 27, 2010 by Raymond Adams
	Copperhead Rod.... (Preview) Here are some photos ( work in progress)of my first ever copperhead rod on a St.Croix Legend Elite blank....7 foot..M/H...Carolina Rig Rod. It took me two years to build this rod..and also used two copperhead skins for the handle and foregrip... This is one of the few rods I have built for myself !!......	MaryLouVandeRiet	9	2964	Jan 23, 2010 by MaryLouVandeRiet
	A few of my personal rods... (Preview)	Kevin Graybeal	11	4544	Aug 16, 2008 by Kevin Graybeal
	Work in progress (Preview) Well, I had family in town and couldn't make it to the meeting on saturday. I wanted to show ya'll a grip i've been working on. It's a split grip with a castaway fully exposed seat and a split foregrip. The inlays are buffalo horn. I'll have more pics of it soon....	Kyle Jud	7	3130	Aug 14, 2008 by Kyle Jud
	Rattan Grips by "Lance Rogge" (Preview) Here is a neat technique for one's "bag o' tricks". PDF tutorial is by Lance Rogge. Thanks Lance!	Raymond Adams	0	17985	Aug 12, 2008 by Raymond Adams
Page 1 of 1 sorted by