Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Help with a micro guide project


Member

Status: Offline
Posts: 8
Date:
Help with a micro guide project


Hello all, newbie with first time post. I am starting a rod project with a Rainshadow RX7 7' blank, Fuji seat, custom made cork split grip and Fuji micro guides. Can anyone suggest a good guide spacing as I currently do not have a guide spacing chart confuse. I am running 9 guides, this includes 1 stripper. Any help is greatly appreciated.

__________________


Senior Member

Status: Offline
Posts: 309
Date:

Hi John! Glad to see you made it here!

There is a post right underneath this one that has my guide spacing chart in it..
http://www.activeboard.com/forum.spark?aBID=123062&p=3&topicID=34903838

You can also come by the shop after you get it taped up and we can go  over it then!


Terry

__________________


Member

Status: Offline
Posts: 8
Date:

Hi Terry, thanks for the info. I thought the guide you posted was for the spiral configuration. I am doing the standard, on the top configuration.



__________________


Senior Member

Status: Offline
Posts: 409
Date:

Welcome Aboard John J...!!!





MaryLou~~

__________________

www.crosstimberscustomrods.net



Senior Member

Status: Offline
Posts: 346
Date:

Hi John & Welcome to the Forum!

You didn't say casting or spinning which would make quite a difference.

While I beleive you should learn what "static guide spacing" is all about, there are a couple guide spacing calculator utilities on my website that should help with getting a good start.

www.rodbuildingtutorials.com



__________________
Raymond Adams
www.snakeriverrods.org
www.rodbuildingtutorials.com
  
                                                                        


Member

Status: Offline
Posts: 8
Date:

Thanks for the responses. biggrin



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard